Практика
Practice
Паводкоустойчивый разрез
Flood-Safe Section
Train student to diagnose water vulnerability through architectural section logic.
- Статус
- Practice-only. Not separately checked. This mini-output trains one lesson skill. You may reuse it later if it helps your module project, but this practice task is not graded separately.
- Время
- 25 to 35 minutes.
ANY tool is allowed.
- paper and pen
- printed section template
- notebook
- PowerPoint
- Canva
- Figma
- tablet sketching app
- simple drawing app
- any other tool that helps you make the section clearly
Create one conceptual Flood-Safe Section for a simple building or entrance fragment.
- 01
Choose one simple example, for example study pavilion with low entrance, classroom entrance at ground level, kiosk, outdoor classroom platform or ground-floor room near a runoff path.
- 02
Draw a simple section showing ground, entry, floor, interior zone and roof edge if relevant.
- 03
Draw rain or runoff direction toward or around the building.
- 04
Add a conceptual flood level line.
- 05
Mark which area becomes a wet zone and which area must remain a dry zone.
- 06
Raise the floor or protect the critical dry area above the water-risk level.
- 07
Move sensitive equipment, storage or electrical elements above the water-risk zone.
- 08
Draw drainage path and a secondary overflow route.
- 09
Add one wet-zone material note, one backflow warning and one recovery sequence.
- 10
Finish with one trade-off sentence about entry height, ramp length, grading or maintenance.
- 11
This is a conceptual learning diagram. It does not replace hydrology, waterproofing or code review.
Наш пример
Используйте пример как ориентир для структуры, а не как шаблон для копирования.
Сначала попробуйте выполнить задание самостоятельно. Затем откройте пример для сравнения.
Пример скрыт.